EZ™️ Ladder Leveler is a quick, easy, and stable way to work with your ladder on stairs without complicated installation.
The ladder base stabilizer is perfect for outdoor and indoor use on stairs.
EZ™️ Ladder Leveler is a lightweight, easy-to-use ladder leveler set up in seconds and has no moving parts.
ABOUT THE PRODUCT：
✔️ Available for Most Ladders, Perfect for outdoor and indoor use on stairs.
✔️ Foldable for Easy Storage, The Ladder Leveler can be split into three sections and folded together for easy storage.
✔️ Assemble in a Minute, Detachable frame. It does not require permanent assembly on your ladder. Two bolts secure the stair supports to enhance structural stability.
✔️ Adjustable Height, 3 x 10 level adjustable height. The step's rise of ladder aide is between 13.4''-19'' and Micro-adjustable to 1/8" for more accurate height adjustment, while the Max. The foot size is 23'' x 7.7''.
✔️ Sturdy & Security, Carbon steel material and the powder-coated surface are for added strength that you can depend on during work with your ladder.
Ladder Leveler Extension for Stairs, Our brand new Ladder Leveler, is professionally designed using high-quality material for safe use. Ladder Leveler is a quick, easy, and stable way to work with your ladder on stairs without complicated installation. With adjustable height (within 1/8"), it is an excellent assistant for your workplace.
We truly believe we have some of the best products globally, and we want to make sure we back that up with a risk-free, ironclad 90-day guarantee.
If you don't have a positive experience for any reason, we will do whatever it takes to make sure you are 100% satisfied with your purchase.
Buying items online can be a daunting task, so we want you to realize that there are absolutely ZERO risks in buying something and trying it out. If you don't like it, no hard feelings, we'll make it right.
We have 24/7/365 Ticket and Email Support. Please contact us if you need assistance.
Moving to a bungalow, so may sell after this use…17feet high with twisting stairs…
The rods can be a bit of a challenge to feed into the holes….
Sturdy and cheep. WAY MORE COST AFFORDABLE THAN HIRING A PAINTER TO DO IT!
This was a perfect solution for setting up a ladder on stairs. The only issue I had was that my ladder was to wide for the platform. I ended setting the ladder half on the extension and my wife supported the ladder just in case. The ladder was very sturdy even though I could not fit on the platform completely. I installed blinds on 3 windows over stairs with a 15’ extension ladder on this platform and I am still here to write the review so overall it’s a great product!
Product appears to work as presented. The device is powder coated steel (beautiful finish) and feels very sturdy. I have my ladder positioned on it now in the stairwell and am in the process of painting the walls. So far, so good. This device solves a problem I have had for a while when working around my stairs. I recommend this product - it is useful.Minor Issue: The assembly instructions are garbage. My instructions are "photos only" and shows two rods inserted next to each other through holes the middle of the assembly - the holes were not drilled to accommodate multiple rods next to each other in this area... once one rod is fitted to set the height of the device, the other holes are not aligned to allow a second rod in the middle section of the device.Solution: The instructions are simply wrong. Luckily, common sense and additional photos on-line make the assembly easy.There are two correct ways to assemble the device.Option 1 - You can assemble using ONE rod in the middle (to set the height of the device to fit your stairs), then use the included bolts and nuts at the top and bottom of the device to solidly attach the top pan and the bottom base. This is the method I chose. You can adjust the height as needed by removing the middle rod. Secure the pin with the key chain ring, chain and kotter pin.OROption 2 - You can assemble using THREE rods. One on the top, one in the middle and one in the base. I think the "rods option" is preferable if you plan to disassemble the device into three pieces (for storage) after each use. Be sure to secure the pins using the key chain rings, chains and kotter pin. The kotter pin goes on the middle rod which is removed to adjust the height of the device.The base and top pan have a non-scratch pad glued to the bottom to protect your stairs. Some folks have commented that they add a "gripper" pad to the bottom to better secure the device while your up on your ladder.Suggestion to Manufacturer: Get a 12 year old to rewrite your assembly instructions. Your KEA inspired "photo only" instructions are wrong and are poorly detailed. Please update them.